FUNCTION INTRODUCTION
1. Installation: After unpacking, loosen the handle bar & quick release, adjust the horizontal
handle to the right direction, lock the horizontal handle, and gently hold the brake lever several
times, adjust the brake lines to the best condition.
2. Charging: Connect the charger, when the charger indicator light from red to yellow green, it
means full.
3. On/Off: Push forward the boot button to turn on the E-bike, the dash board lights up; Push
back the boot button to turn off the E-bike.
4.Battery indicator: There are four gears on the meter.
5.Horn: Pressing the horn button, the horn sounds up. Clicking recommended. pressed
continuously, the horn will not sound
6. Headlight: The horn button is also the headlight switch, Long press three seconds can be
turned on & off the light.
7.Brake and rear light: When braking, the rear light will blink slowly;In locked state, the rear light
blinking quickly; In other conditions, the rear light will be synchronous with the front light , You
can not speed up before fully loosed the brake.
8. Electric mode and Assisting mode: the default of the Ebike is assisting mode, only one gear.
While it is assisting mode, you also can use the electric mode.
9.Cruise control: When you are riding, press the cruise button, then release the button, it will
maintain and move at the current speed . If repress the accelerator or braking will cancel the
cruise control.
10.Hold the brake gently when going downhill,can recover the part of the power and charge for
your Ebike.
Switch Button
DC2.1 charge port
Dash Board
Horn
Accelerator
