9
5 secs
This appliance is hot when in use and for a
short period after use. Do not let bare skin
touch hot surfaces. If children are present,
consider positioning the appliance out of
their reach.
Unplug from the mains electricity supply. If the appliance has been in use, leave for
1 to 2 hours before cleaning to allow the appliance to cool completely. Dust may
accumulate on the surface of the machine. Wipe dust from the loop, filter unit and
other parts with a dry or damp cloth when dust accumulates. Do not use detergents
or polishes
Clearing blockages
CAUTION: hot when in use
Cleaning
Ensure the appliance is unplugged. If the appliance has been in use, leave for 1 to 2 hours in order to allow the appliance to cool
down completely. Look for blockages in the air inlet holes and in the small aperture inside the air loop amplifier. Use a soft brush
to remove debris.
To set the sleep timer, select the desired time. When time
reaches zero, the appliance will go into standby mode.
To cancel, increase the time until two dashes appear.
The sleep timer will
turn your appliance
off once the time set
has passed.
Sleep timer
Tilt function
Carefully hold the base and the main body. Tilt the amplifier
forward or backward for the required airflow angle.
Summary of Contents for pure hot + cool link
Page 15: ......
