background image

7

7.  Suitable for dry location ONLY. Do not use 

outdoors or on wet surfaces and do not expose 

to water or rain.

8.  Do not handle any part of the plug or appliance 

with wet hands.

9.  Do not operate any appliance with a damaged 

cable or plug. Discard the appliance or return 

to an authorised service facility for examination 

and/or repair. If the supply cable is damaged 

it must be replaced by Dyson, its service agent 

or similarly qualified person in order to avoid 

a hazard.

10. If the appliance is not working as it should, 

has received a sharp blow, has been dropped, 

damaged, left outdoors, or dropped into water, 

do not use and contact the Dyson Helpline.

11. Do not stretch the cable or place the cable under 

strain. Keep cable away from heated surfaces.

12. Do not run cable under carpeting. Do not 

cover cable with throw rugs, runners or similar 

coverings. Arrange cable away from traffic area 

and where it will not be tripped over.

13. Do not unplug by pulling on the cable. 

To unplug, grasp the plug, not the cable. The use 

of an extension cable is not recommended.

14. Do not put any object into openings or the inlet 

grille. Do not use with any opening blocked; 

keep free of dust, lint, hair, and anything that 

may reduce airflow.

15. Do not use any cleaning agents or lubricants 

on this appliance. Unplug before cleaning or 

carrying out any maintenance.

16. Always carry the appliance by the base, do not 

carry it by the loop amplifier.

17. Turn off all controls before unplugging. Unplug 

from socket when not in use for extended 

periods. To avoid a tripping hazard, safely coil 

the cable.

18. Do not use near furnaces, fireplaces, stoves or 

other high temperature heat sources.

19. Do not use in conjunction with or directly next 

to an air freshener or similar products. Do not 

spray or apply perfumes directly on or near the 

filter. Keep essential oils and chemicals away 

from the appliance.

20. WARNING: Chemical Burn and Choking 

Hazard. Keep batteries away from children. 

This product contains a lithium button/coin cell 

battery. If a new or used lithium button/coin cell 

battery is swallowed or enters the body, it can 

cause severe internal burns and can lead to 

death in as little as 2 hours. Always completely 

secure the battery compartment. If the battery 

compartment does not close securely, stop using 

Summary of Contents for Pure Cool TP04





























Reviews: