Getting started
Deep clean cycle button
Stand-by button
Amplifier loop
Outer cover
release buttons
Outer cover
Water tank
release buttons
Stand-by
Auto purify mode
Airflow speed
Oscillation
Sleep timer
Information menu
Auto humidify mode
Humidity control
Airflow direction
Night mode
The layout of the remote control with the standby button on the top left, the Auto purify mode button below, then the
Airflow speed toggle up and down button. Below that is the Oscillation button and finally at the bottom is the Sleep timer
button. On the top right-hand side is the Information menu button, then going downwards, the Auto humidify mode
button, humidity control toggle button, Airflow direction and then Night mode button at the bottom.
Image of the machine with the location
of parts labelled.
The large oval loop making
up the top of the machine.
Two push down buttons
located either side of the
main body of the machine.
The mesh cover on the
bottom of the machine is
in two parts, front and back.
The buttons to remove the
water tank are located on
both sides, just above the
bottom of the machine.
The top, of the two buttons
located on the main body of
the machine just below the
loop amplifier, is the Deep
clean cycle button.
Below the Deep clean
cycle button is the
standby button.
