Cleaning the lifetime filter
Only the blue foam pad and the
yellow cage should be rinsed –
not the filter housing.
3
Submerge the filter and cage
in cold water and rinse
thoroughly.
CAUTION
• Rinse in cold water only.
• Do not use detergent.
• Do not put in a washing
machine or dishwasher.
4
Rinse the blue foam pad and
squeeze gently, repeating until
the water runs clear.
5
Rinse the yellow cage and tap
firmly, repeating until the water
runs clear.
6
Leave in a warm place to dry
for 12 hours. Make sure the
filter is completely dry before
replacing in the machine.
CAUTION
• Do not dry in an oven or
microwave.
• Do not dry in a clothes dryer.
• Do not dry near an open
flame.
7
When the blue filter pad and
yellow cage are completely
dry, replace in the filter housing
and click back into machine,
pressing points
1
and
2
firmly to secure.
CAUTION
• Do not use the machine
without the filter in place.
Cleaning the lifetime filter
A
Lifetime pre-motor filter
Rinse at least once every six
months in accordance with
the instructions opposite.
If machine is regularly used
for vacuuming very fine dust
such as plaster dust or carpet
fresheners, you may need to
rinse more often.
B
Lifetime post-motor filter
This is a permanent lifetime
filter – it does not require
rinsing or replacement.
Do not remove or attempt
to rinse this filter.
Cleaning the
lifetime filter
CAUTION
• Disconnect the machine from
the electrical outlet before
removing filter. Failure to
do so could result in electric
shock or personal injury.
To remind you when to rinse your
pre-motor filter, circle your two
6-monthly rinses on the sticker
provided under the clear bin.
1
Press the filter release catch
to remove the filter housing
from the machine.
2
Remove the filter from the
housing.
1
2
B
A
4
5
6
3
7
12 hrs
Dyson Helpline
contact us on
1-866-693-9766
12
13
2
1
All manuals and user guides at all-guides.com
