service manual
Issued 10/06
18
Fitting notes
Fit one of the switches into the housing.
Attach the live wire from the powercord to the
switch.
67
Attach the red wire to the brushbar switch.
Ensure all wires are appropriately dressed into
the channels and clips provided.
69
Switch cover and powercord assembly - fitting
Attach the neutral wires together. Clip the
connection insulator over the cables. Neatly dress
the cables into the channels provided.
66
Fit the cable protector onto the powercord.
Firmly press the powercord into the duct assembly.
Ensure the end of the outer insulation ends where
shown.
64
Slide the cable protector into the channel
on the side of the duct.
65
Refit the other switch into the housing.
Attach the linked live wires to both switches.
68
