RCSH-980
16
• When cleaning the appliance, never use solvent (acetone,
benzole, petrol, alcohol, etc.) as these may solve the casing
material, or the internal parts of the appliance if they get into.
Do not use cleaning agents with coarse or grinding effect.
• If you shave every day you’ll need to remove hair from inside
the appliance two or three times a week. The cleaning brush
can be used on the shaver head, vibrating cutters and long hair
trimmer but must NOT be used on the cutting foils. Follow the
steps below to clean your shaver.
a) Make sure the shaver is switched off and unplugged. Remove
the protective cover. Press the shaver head release button
(part no. 9) and remove the shaver head by holding the side of
it.
b) Use the brush to remove any skin and hair from inside the
vibrating cutters. Thoroughly clean the area around and below
the cutters.
c) Gently tap the side of the shaver head to remove any hair from
inside. Brush the inside of the shaver head, taking great care
not to touch the cutting foils with the bristles of the brush.
d) When the shaver head and cutters have been cleaned, replace
the shaver head and press it back in place until you hear a click.
Summary of Contents for RCSH-980
Page 1: ...3 3 4 5 6 7 8 9 2 ...
Page 97: ...97 ...
