
POWER SUPPLY
The appliance must only be connected to mains electricity of 230V and 50Hz.
Always ensure the mains voltage where you’re using the appliance corresponds
to the value shown on the nameplate of the appliance.
USING OF APPLIANCE
Before use
•
Unpack the appliance and remove all the packing materials.
•
Inspect the appliance and the accessories carefully to verify their soundness and
undamaged condition. Only perfectly sound and damage-free appliances may be
connected to the electrical mains.
•
After removing the packaging (or after a lengthy period of storage), carefully clean all the
parts that come into direct contact with food; Detailed instructions are given in the
'Maintenance and cleaning' section.
Assembling the blender
1. Fasten the blender jar to the motor unit, making sure that it fits
properly. Mount the blender jar so that, facing the device, the jar handle
is positioned to the right-hand side of the device. Check to make sure
the jar is securely fastened to the motor unit. The blender jar can only
be fastened normally to the motor unit in one specific position. Thanks
to the safety switch the device can only be activated if the jar is
positioned properly. If, in the course of fastening the blender jar to the
motor unit, the blender jar gets stuck or does not fasten to the motor
unit precisely, do not force it, instead rotate the plastic clutch on the
bottom of the jar just a bit, and afterwards try to fasten the jar to the
motor unit again.
2. Place the lid on the bowl so that the collars on the lid fit in the grooves
of the bowl, and then turn the lid slightly clockwise, so that the arrow
on the lid faces towards the nose of the bowl. Then insert the graduated
jar into the filling hole located in the middle of the bowl lid.
PB-460
8
User'sManual for PB-460_User's Manual for PB-460 2016.08.02. 19:02 Page 8