13
Using your handmixer
1. Insert the beaters.
•Fit the kneading beaters or egg beaters to the beater holes until the beater
clicks into position. (refer to the beater markings).
•The beater with the end washer and a small gear should be fitted into the large
hole and the other for the small one.
2. Put the bowl onto the base.
3. Fill the ingredients into the bowl.
4. Fit the mixer.
•Press the release button to rotate the rocker upwards.
•Press the end-tab on the rocker backwards.
•Then place the mixer onto the rocker with the snap-fits buckled at the square
holes on the mixer.
•Release the end-tab, the lateral rib on the end-tab should be inserted into the
narrow slot on the rear cover of the mixer.
5. Fit the bowl cover.
•Insert the bowl cover into the rocker along the narrow long slots on the sides
of the rocker.
•Then press the release button turn the rocker to the normal horizontal
position.
6. Plug in the appliance.
7. Start and stop the mixer.
•Start from the lowest speed “1”. You can increase the speed up to the highest
speed “5” as you need. The maximum operating time must be less than 10
minutes.
•If you desire more power, you may press the button “turbo” for the maximum
speed.
•The food bowl will rotate automatically to make mixtures evenly mixed as the
mixer runs.
•When you have finished mixing, stop the mixer by pushing the speed control to
"0" immediately.
8. Unplug from the outlet when you have finished mixing and always before you
clean it.
9. Pull out the bowl cover
•Wait until the beaters have stopped revolving;press the release button to
rotate the rocker upwards.
• Pull out the bowl cover from the rocker.
10. Remove the mixer from the rocker
• press the end-tab of the rocker backwards by one hand;meanwhile, pull the
