EN
DYON SMART 42 AD
33
If your cable network provider is not in the list, you can start a
Quick or Advanced search via Other.
You can adjust the search mode with the OK button and
confirm with the
button.
ATTENTION!
Press the EXIT or MENU button to cancel the channel
scan.
Please note that if you cancel, no stations may be stored
and therefore no station picture is displayed.
FIRST AID!
No station is displayed after the initial installation
Check that the antenna cable is correctly connected to
both the junction box and the device.
Make sure that both the correct reception mode and the
correct reception path have been selected. If you are not
sure, please carry out the initial installation again using
the "ADVANCED" menu and the "Initial installation" menu
item.
If a CI module detects errors such as "NO CI module" or
"Error code 17" is displayed, this can have various
causes. Please refer to the chapter "Troubleshooting".
