98200094.01
P
o
w
e
r V
is
io
n C
X
—
H
a
rl
e
y
Viewing the Vehicle Info
This menu allows you to view the device status (locked/unlocked),
VIN #, Model #, ECU serial number, and Tune CMP.
Select
Vehicle Tools
>
Vehicle Info
.
Viewing Diagnostic Codes
This menu allows you to read and clear diagnostic
trouble codes (DTC).
1.
To read codes, select
Vehicle Tools
>
Diagnostics
>
Active Codes
.
2.
To clear codes, select
Vehicle Tools
>
Diagnostics
>
Clear Codes
.
Viewing the PVCX Info
This menu allows you to view PVCX info and create a PV_INFO.TXT
file used to retrieve updated tunes or send to Tech Support.
1.
Select
Device Tools
>
Device Info
>
About
.
2.
Press the top button to create a text file.
3.
Connect the PVCX to your computer.
Retrieve Files:
Go to www.dynojet.com/pvcxws.aspx. Upload the
PV_INFO.TXT file to retrieve updated tunes for your vehicle.
Tech Support:
If requested by Dynojet Tech Support, email
PV_INFO.TXT to [email protected].
Viewing Gauges and Logging Data
1.
Press the bottom button to cycle through the five available
gauge screens.
2.
Press the middle button to begin logging data. Press the middle
button again to stop logging.
3.
Connect the PVCX to your computer.
4.
Use the Power Core software to view log files.
Flashing Your Vehicle
The PVCX must be locked to the vehicle ECU to function properly.
Note:
Once locked to the vehicle ECU, the PVCX will not work on
another vehicle.
1.
From the Main Menu, select
Flash Tune
.
2.
Select the tune file and press
Enter
to view the Tune Info.
3.
Press
Enter
to accept the tune and lock the PVCX to the vehicle.
Note:
Lock to Vehicle will only happen on the first flash.
4.
Press
Enter
to pair and lock the PVCX to the ECU and to begin
the flash. Do not turn off the key switch or disconnect the PVCX
during flash.
5.
After the flash is complete, turn the key off and wait 45 seconds
before turning the key back on to start.
