IFC17900.01
www.powercommander.com
2018 Kawasaki KLX250S - 3
1
Remove the seat, all side panels, and the fuel tank.
2
Secure the PCFC module to the side of the battery with the supplied Velcro
(Fig. A).
Clean surfaces with the alcohol swab before attaching the Velcro.
3
Secure the PCFC ground wire with the small ring terminal to the negative (-)
terminal of the bike’s battery.
Route the pair of 4-pin connectors towards the top of the rear fender.
Route the other wiring harness branch with the pair of 2-pin connectors
towards the throttle body.
4
At the top of the rear fender, locate and unplug the stock O2 sensor
connectors (Fig. B).
5
Plug the pair of 4-pin PCFC connectors in-line with the stock O2 sensor
connectors (Fig. C).
FIG.A
FIG.B
FIG.C
Ground
Unplug
