POD300 - 4
ABOUT
Displays serial # and firmware version loaded into the mod-
ule
Check www.powercommander.com download section
EXPORTING and VIEWING LOG FILES
Download Power Core software by going to www.dynojet.
com and click on Downloads and go to Software. This will
download the complete Power Core Suite. This module will
use the POD-300 and WinPep 8 Data Center programs.
Once you open the POD-300 program it will automatically
retrieve any logs stored in the module. Click on the log file
you want to export and then click on either:
Export to WinPep8 Data center
- Choose output folder
location then click Export CSV. Data Center opens for you.
Click on the NONE on the X and Y axis of the graph to
choose which channels you want to view. Only channels
logged will be shown as an option.
Export to CSV file
- saves file to destination file to be
viewed in Microsoft Excel format.
This software also allows you to delete logs from the unit and
update the firmware if needed.
Click here to choose the channels you want to view
POD DISPLA
Y
DISPLAY SETTINGS
CONTRAST -
Adjust the screen contrast 0-100
BRIGHTNESS -
Adjust the brightness of the screen
0-100. This will only be visible when unit has power
from the vehicle.
MODE -
Flip the orientation of the screen
