7
Install the Power Commander in
the tail section. Make sure to
use the supplied alcohol swab to
clean the inner rear fender
before attaching the Power
Commander. Use the supplied
velcro to secure the unit to the
inner rear fender (Fig. D).
Fig. D
i511-411
www.powercommander.com
2005 Triumph Daytona 650 - PCIII USB -
3
8
Unplug the stock O2 sensor
from the wiring harness. This
connector is located underneath
the fuel tank next to the regula-
tor/rectifier (Fig. E).
9
Plug the Dynojet O2 controller
into the stock wiring harness.
Fig. E
10
Install the O2 controller to the
right side of the inner rear fend-
er (Fig. F) using the supplied
velcro.
11
Reinstall fuel tank and seats.
Fig. F
Unplug harness
O2 controller
