C H A P T E R 1
DynoWare RT Electronics
DynoWare RT Upgrade for Model 424x Dynamometers Installation Guide
1-6
N
ETWORK
C
ONNECTIONS
The Dynojet DynoWare RT dyno electronics connects to your computer directly or
over a Local Area Network. If you have an existing network, connect the DynoWare RT
main module to a router or a network switch on your network. If you don't have an
existing network, you can create a network for the DynoWare RT by connecting the
main module to a router.
There are some advantages to connecting the DynoWare RT to a network, particularly
a wireless network. With DynoWare RT on a network, a single dedicated computer for
the dyno is no longer required. Any computer on the network can connect and operate
the dyno. A wireless connection allows you to control the dyno from inside the vehicle
without a cable running to the DynoWare RT main module.
Note:
The DynoWare RT allows only one computer at a time to connect.
When the DynoWare RT main module is on a network connected to the internet,
automatic updates for both the DynoWare RT and software are possible.
Figure 1-2: DynoWare RT Network Connections
connection method
auto updates
multi-computer
connection
wireless connection
Wireless Network
Internet
Yes
Yes
Yes
Wireless Network
Router
Yes
Yes
Direct Connection
Point to Point
wireless network
internet and router
direct connection
point to point
