Dynex DYNEX DX-GB5PRT Quick Setup Manual Download Page 1

Network 

storage

PC

Switch

Router

Modem

Internet

Internet

Modem

Router

Switch

Internet

Power cord

Switch

Power

outlet

PC

Switch

Network 

storage

DX-GB5PRT

5-Port Gigabit Ethernet Switch

Congratulations on your purchase of the DX-GB5PRT Dynex 5-Port 
Gigabit Ethernet Switch. The DX-GB5PRT provides increased speed and 
backbone connections to make Gigabyte a reality.

 

Safety Notices

•  Do not use this product near water, for example, in a wet basement 

or near a swimming pool.

•  Avoid using this product during an electrical storm. There may be a 

remote risk of electric shock from lightning.

•  Do not place heavy objects on the switch.
•  Allow room for adequate ventilation.

Package contents

•  DX-GB5PRT Dynex 5-Port Gigabit Ethernet Switch
• 

Quick Setup Guide

Features

•  Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p 

standards

•  Five 10/100/1000M RJ45 ports
•  Supports IEEE 802.1p QoS
•  Support Green Ethernet technology to implement power saving 

features. (In Low Power Idle mode, up to 61.5% of the power can be 
saved.)

•  Supports IEEE 802.3x flow control for full-duplex mode and 

backpressure for half-duplex mode

•  Non-blocking switching architecture that forwards and filters 

packets at full wire-speed for maximum throughput

•  8K entry MAC address table of the DX-GB5PRT with auto-learning 

and auto-aging

•  Supports for Jumbo frames of up to 15 KB
•  LED indicators for monitoring power, link, and activity

Components

Front panel

Back panel

QUICK SETUP GUIDE

Installing the switch

1

  Connect the power adapter to the switch and power outlet. 

2

  Connect the PC(s) and other device(s) to the switch.

3

  Connect the switch to the Internet.

4

  Install complete connection.

LED indicators

When the switch is plugged in and receiving power, the LED indicators 
respond as follows:

LED

Power

Link/Act
Ports 1-5

Status

On (green)

Off

On (orange)

Flashing (orange)

On (green)

Flashing (green)

Indication

Power on

No device is connected to the corresponding port.

A 10/100 Mbps device is connected to the corresponding port.

A 10/100 Mbps device is transmitting or receiving data
through the corresponding port.

A 1000Mbps device is connected to the corresponding port.

A 1000Mbps device is transmitting or receiving data through 
the corresponding port.

Power port

Ports 1-5

Power LED

LEDs 1-5

DX-GB5PRT_10-1123_QSG_V1.eps   1   10/29/2010   10:16:02 AM

DX-GB5PRT_10-1123_QSG_V1.eps   1   10/29/2010   10:16:02 AM

Reviews: