2
Contents
Dynex DX-WGPNBC or
DX-WGPDTC Wireless LAN
Card
Contents
Introduction ..................................................................................... 2
Installing the software and hardware .............................................. 2
Configuring the wireless network .................................................... 3
Troubleshooting ............................................................................... 6
Legal notices .................................................................................... 7
Français ....................................................... 8
Español ...................................................... 15
Introduction
Thank you for purchasing a Dynex Wireless LAN 802.11g Enhanced
notebook or desktop card. This package contains:
• A Wireless LAN 802.11g Enhanced notebook or desktop card
• A printed user guide
• A CD containing the wireless network card utility and drivers and
this user guide
If anything is missing, contact Dynex at (800) 305-2204.
Installing the software and
hardware
Use the following procedures to set up your wireless network.
To install wireless networking on a Windows XP computer:
Caution:
Do not insert the notebook or desktop card until instructed to do
so.
1
Install the access point. For more information, see the access point
documentation.
2
Turn on your computer.
3
Insert the included CD in the optical drive.
4
If the installation program does not start automatically, use
Windows Explorer or My Computer to browse the CD and locate
the file named
setup.exe
, then double-click
setup.exe
to start
installing the software.
5
Follow the on-screen instructions to install the software.
6
If you are installing a desktop card, turn off your computer, install
the card, then turn on your computer again. The
Found New
Hardware Wizard
opens.
-OR-
Insert your notebook card into the appropriate slot in your
notebook. The
Found New Hardware Wizard
opens.
7
Click
Install the software automatically (Recommended)
,
then click
Next
.
8
If a warning box opens, click
Continue Anyway
. Your computer
copies files to your hard drive.
9
Click
Finish
.
To install wireless networking on a Windows 98, Windows 2000, or
Windows ME computer:
Caution:
Do not insert the notebook or desktop card until instructed to do
so.
1
Install the access point. For more information, see the access point
documentation.
2
Turn on your computer.
3
Insert the included CD in the optical drive.
4
If the installation program does not start automatically, use
Windows Explorer to browse the CD and locate the file named
setup.exe
, then double-click
setup.exe
to start installing the
software.
5
Follow the on-screen instructions to install the software.
6
If you are installing a desktop card, turn off your computer, install
the card, then turn on your computer again. The
Found New
Hardware
Wizard opens.
-OR-
Insert your notebook card into the appropriate slot in your
notebook. The
Found New Hardware
Wizard opens.
7
Right-click on the
My Computer
desktop icon, click
Properties
,
then click
Hardware Device Manager
. Make sure that the card is
listed as one of the devices in your computer.
DX-WGPNBC_WGPDTC_Combo.fm Page 2 Thursday, June 22, 2006 12:31 AM
