Installation instructions
7
DX-TVM112
STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back
1
Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages
and scratches.
2
If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV
for instructions.
3
Temporarily lay the TV brackets (
B
and
C
) on the back of your TV.
4
Align the screw holes in the TV brackets with the mounting screw holes on your TV.
5
Identify which type of back your TV may have:
•
Flat back
: The brackets lay flush against the back of your TV and do not block any jacks. You do not need spacers when
assembling the wall mount.
•
Obstructed back
: The brackets block one or more of the jacks on the back of your TV. You will need spacers when
assembling the wall mount.
•
Irregularly-shaped back
: There is a gap between a bracket and some part of the back of your TV. You will need spacers
when assembling the wall mount.
6
Remove the TV brackets.
DX-TVM112_13-0526_MAN_V4_EN-A4.fm Page 7 Friday, June 7, 2013 6:43 AM
