Dynex DX-PCCNG50, User Manual

Page: 8 / 13

8
DX-PCCNG50
5
Click Finish to complete the process, then click Exit to close the PCI-Express Gigabit Ethernet
Adapter window.
To verify the driver installation:
1
Click Start , right-click Computer (or My Computer), then select Properties .
2
Click Device Manager, then click Network Adapters .
3
If the device has been correctly installed, its sub-entry should be displayed as Dynex
PCI-Express Gigabit Ethernet Adapter.
To uninstall the Windows driver:
1
Click the Add or Remove Programs tab ( Uninstall a Program in Windows 7) in the
Windows Control Panel .
2
Click the Remove button to uninstall the PCI-Express Gigabit Ethernet Adapter Card driver.
3
Click Finish to complete the driver uninstall procedure.
Troubleshooting
Check the following guide for the possible causes and solutions for a problem before contacting the
nearest service center or dealer for repairs.
14
Specifications
Symptom Solution
The Windows Device
Manager does not show
the PCI-Express Gigabit
Ethernet Adapter. • Make sure that the PCI Express Card adapter is correctly installed in
the PCI express slot.
• Remove the adapter and try a different PCI express slot in case the
bus has conflicts.
• Repeat the driver installation procedure, then make sure that the
device exists. Right-click
Computer in the Start menu (or My
Computer on your desktop), click Properties , then click the Device
Manager . If the Dynex PCI-Express Gigabit Ethernet Adapter is
shown, the PCI Express Card adapter is working correctly.
• Make sure that your computer's operating system is updated to the
latest version.
Conflict with other
Windows PCI adapters
(indicated by an entry in the
Device Manager with a
red X or yellow exclamation
point.)
• Move the adapter to another slot, then restart your computer.
Windows re-configures itself and re-assigns resources. Check your
device manager again.
Interface Supports PCI Express 1.1
Buffer size Transmit/Receive On Chip Buffer (48K) support
Standards IEEE 802.3ab 1000Base-T, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p
Transmission rate 10/100/1000 Mbps
Connector supported One 10/100/1000 M Auto-Negotiation RJ45 port
Software Support drivers for Windows 8 (32 and 64 bit), Windows 7 (32 and 64 bit),
Windows Vista (32 and 64 bit), Windows XP
DX-PCCNG50 14-1421_MAN_V1_ENG.fm Page 8 Tuesday, January 13, 2015 10:31 AM