Dynex DX-M1113 - Hands-Free Wireless Microphone, User Manual

Page: 6 / 50

6
Setting up your wireless microphone
Setting up your wireless
microphone
The following illustration shows two basic ways to connect your receiver
to an amplifier.
Note: When you install the receiver, make sure that it is at
least 10 feet (3 meters) off the floor and at least 10 feet (3
meters) away from surrounding walls.
To set up the receiver:
1 Place the receiver on a flat, stable surface.
2 Fully extend the antenna, and make sure it is perpendicular
to the receiver.
3 Open the battery compartment, install two AA batteries
into the battery compartment, then close the
compartment. Make sure that the + and – symbols on the
batteries align with the + and – symbols inside the battery
compartment.
4 Plug one end of the audio cable into the AUDIO OUT jack on
the receiver.
Audio mixer
Receiver
Amplifier
Speaker
Karaoke amplifier
Speaker
DX-M1113.fm Page 6 Tuesday, September 19, 2006 7:07 AM