Dynex DX-EHB4 User Manual Download Page 3

Dynex DX-EHB4 Network Hub

3

Link/Rx

—Indicates when the port has connected to the network (on) or when 

the port is receiving data (blinking). Each port has one Link/Rx LED.

Troubleshooting

If the 

Link/Rx

 port is connected but the LED is off, make sure that:

• Power for both the hub and the connected node is on.
• The network cable is not loose.
• The network cable is the correct type.
• The network cable is not broken.
• The network cable’s RJ-45 connectors have been wired correctly.
• The connected node’s network adapter is working.

Specifications

Data transfer rate.............................................................................. 10 Mbps
Protocol ...........................................................................................CSMA/CD
Network type ................................................................................... 10Base-T
Topology .................................................................................................. Star
Power requirement .................................................................................9VAC
Power consumption .................................................................5 W maximum
Operating temperature ........................................... 32° to 104°F (0° to 40° C)
Humidity tolerance ................................................5%-95% non-condensing

C

ABLE

 

AND

 

CONNECTOR

 

REQUIRED

 

SPECIFICATIONS

Cable type.................................................................................10Base-T UTP
Cable  characteristics...............................................0.4-0.6 mm (22-26 AWG)

8-wire (only four wires are used for 10Base-T)

Maximum  segment  length..................................................................100 m
Connectors.............................................................................................RJ-45
© 2005 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise 
Services, Inc. Other brands and product names are trademarks or registered trade-
marks of their respective holders. Specifications and features are subject to 
change without notice or obligation.

DX-EHB4.fm  Page 3  Friday, April 29, 2005  4:14 PM

Summary of Contents for DX-EHB4









Reviews: