Dynex DX-E101, Installation Manual

Page: 7 / 46

Installing the adapter 7
9 In the Hardware Update Wizard , click Install from list or specific
location (Advanced) , then click Next . The Please select your search and
installation screen opens.
10 Click Search for the best driver in these locations .
11 Click to remove the check in the Search removable media (floppy,
CD-ROM) check box.
12 Click the Include this location in the search check box, type D:\WINXP
(where D: is the drive letter for your CD or DVD drive) in the Include this
location in the search box, then click Next . Windows searches for the
drivers on the DX-E101 CD and installs the drivers. When the installation is
complete, the
Completing the Hardware Update Wizard screen opens.
13 Click Finish . The driver installation is complete.
W
INDOWS
2000
To install the drivers in Windows 2000:
1 Make sure that you have installed the adapter into your computer and have
connected the network cable.
2 Turn on your computer. The Found New Hardware Wizard opens.
Dynex5x7-multi.book Page 7 Wednesday, September 14, 2005 9:09 AM