18
www.dynexproducts.com
3
Insert the concrete wall anchors (
Q
) into the pilot holes and use a hammer to make
sure the anchors are flush with the concrete surface.
4
Align the wall plate (
A
) with the anchors, insert the lag bolts (
P
) through the lag
bolt washers (
O
), then through the holes in the wall plate. Tighten the lag bolts only
until they are firm against the wall plate.
CAUTION:
Avoid potential injuries or property damage! DO NOT over-tighten the lag
bolts (
P
).
Concrete wall
Level
