Dynex DX-AC501 Quick Setup Manual Download Page 2

4

  Connect the adapter to an AC power outlet and operate 

the device according to the manufacturer’s instructions.

Cautions

 

•  Unplug the adapter before selecting a new DC output 

voltage. Failure to do so may damage the device.

•  The adapter emits heat when operating at its maximum 

capacity for an extended period of time. Handle it with 
care when it’s hot.

Specifications

Model: DX-AC501
Input: 100-240V AC 50-60Hz
Output: 3/4.5/6/7.5/9/12V DC 500mA
Operating temperature: 0°C ~ 40°C
Storage temperature: -10°C ~ 70°C
Relative humidity: 10% ~ 90%
Cable length: Approximately 6 ft. (1.83 m)
Housing: PC (Plastic)
Safety requirement: FCC, ICES-003

Note

: This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. 
This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instruction, maybe cause harmful interference to radio 

communications. However there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the 
following measures: 
-  Reorient or relocate the receiving antenna.
-  Increase the separation between the equipment and receiver.
-  Connect the equipment into an outlet on a circuit different 
  from that to which the receiver is connected.
-  Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions: (1) this device may not cause harmful 
interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES‐003;
Cet appareil numérique de la classe B est conforme à la norme 
NMB-003 du Canada. 

One-year limited warranty

Visit www.dynexproducts.com for details.

© 2011 BBY Solutions, Inc. All Rights Reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other 
products and brand names are trademarks of their respective owners.

ENGLISH 11-0887

Reviews: