DYNAVOICE CSB-V12 User Manual Download Page 6

5

The best audio experience is usually at a listening position in the middle, between the speakers and 

at least at the same distance from the front speakers as it is between them. It is also here that your 

subwoofer should deliver the best possible sound.

The Dynavoice CSB-V type subwoofers are equipped with a front firing slot type bass reflex port, 

place this facing away from any walls or obstacles, this applies for all the examples that follow.

Hi-Fi setup (stereo)

Front speakers

 - Place your front speakers 3-4 

meters apart, about 0,5-1 meter away from the rear 

and side wall. The tweeters should be at the same 

height as your ears when you are comfortably 

sitting in your listening position and the angle of 

the speakers should be 22-30 degrees towards you. 

Subwoofer

 - Place the subwoofer in the middle, 

centered between your speakers with the front 

facing your listening position. You can use this as a 

start off point and move it sideways to try some 

alternatives. If you place the subwoofer in a corner 

you will usually experience more bass.

TV

30°

22°

30°

22°

Home cinema setup (5.1 & 7.1)

Front speakers (L&R)

 – When positioning the front speakers, the tweeters should be at the same 

height as your ears when you are comfortably sitting in your listening position. The angle of the 

speakers should be 22-30 degrees towards you. Also test different distances from the wall, this will 

usually affect the bass tones.

 

Center Speaker

 - Make sure that it is placed in the middle, centered between the front speakers, 

place it above or below your screen, and try to tilt it so that it is aimed to ear level. 

Surround Speakers (L&R)

 – Place the surround speakers approximately 50cm above ear level, and 

aim them 90-110 degrees towards the listening position. 

Rear Speakers (L&R 7.1)

 – Place the extra rear speakers at same height as the standard surround 

speakers, and position them so that they have a 135-150-degree angle against the listening position.    

Using one subwoofer:

 Place the subwoofer in the middle, centered between your speakers with the 

front facing your listening position. You can use this as a start off point and move it sideways to try 

some alternatives. If you place the subwoofer in a corner you will usually experience more bass.      

Using two subwoofers:

 Place the subwoofers in the front two corners, or one subwoofer on the 

opposite side diagonally across from each other or center the subwoofers between the front 

speakers straight across from each other.   

2.0/2.1 SETUP

Summary of Contents for CSB-V12













Reviews: