DYNAVOICE CL-16 User Manual Download Page 6

5

If a subwoofer is added

 - Place the subwoofer in the middle, centered between your speakers with 

the front facing your listening position. You can use this as a start off point and move it sideways to 

try some alternatives (consult your subwoofer manual to learn how to place it).

Positioning your speakers

Depending on the type of room, what your listening preferences are and what setup you have, the 

final positioning of your speakers may vary. Most likely you will have to try out a few different 

positions before you find the perfect sweet spot. This means that we cannot guarantee that the 

example that follows will be suitable for you, instead consider these to be standard recommenda-

tions and starting points.

The best audio experience is usually at a listening position in the middle, between the speakers and 

at least at the same distance from the front speakers as it is between them. You also need to 

consider the angling of the speakers as displayed in the examples below.

All Dynavoice Classic models are equipped with a bass port on the back of the speaker. Make sure 

to leave at least 10-30cm of space behind the speakers so that the air flow is uninterrupted.

TV

30°

22°

30°

22°

2.0/2.1 SETUP

Hi-Fi setup (stereo)

Front speakers

 - Place your front speakers 2-4 meters apart, about 0,5-1 meter away from the rear 

and side wall, try to make sure that both speakers have the same distances from surrounding walls. 

The tweeters should be at the same height as your ears (0-15 degrees angle) when you are comfor-

tably sitting in your listening position, this is important so take your time measuring the different 

heights. The angle of the speakers should be 22-30 degrees towards you. 

When listening, if you feel that the music lacks vocals, or if you hear one side more than the other, 

try moving the speakers further apart or closer together. You can also try moving them closer to 

you or further away from you. If the bass feels boomy or in any way off, make sure that the reflex 

port on the back of the speakers is not to close to the wall. Some acoustic disturbance can be the 

result of your surroundings. If you feel that the sound is “aggressive”, try using what you have to 

help absorb unwanted resonance, do the opposite if you feel that the sound is muffled.

10-15°

Summary of Contents for CL-16











Reviews: