4.
D2 Light Panel raised, to expose the mounting bracket/
holes. Locate matching mounting holes and secure D2
to rack using the proper sized washers, nuts and bolts.
Lifting the D2 unit requires 2 people. Bending or twisting the unit will damage the
units sliding mechanism.
Refer to the Dynavision D2 assembly instructions for assembly and operation details
5.
After installing the first set of nuts and bolts, raise the D2
until the next mounting bracket/holes are visible. Locate
matching mounting holes and complete the install with
another set of washers, nuts and bolts.
Mounting the D2 to the Stand is completed when all 4
mounting locations are properly and securely bolted
.
To properly secure the D2 to the stand, you must install all 4 mounting locations
provided, with ¼” mounting nuts and bolts with washers.
Refer to the Dynavision D2 assembly instructions for assembly and operation details