_____________________________________________________________________________________
Pagina 13
Power Connect
Rear PWR – Red (pin 2)
+12V output when rear input is activated (max 200mA output)
You can adjust this wire option in the OSD menu.
RearCam-Power
: Setup for “Rear-PWR” wire
ON: +12V output (max 200mA)
AUTO: +12V out in “Rear” mode (200mA)
OFF: Power OFF
Rear DET – Brown (pin 5)
+12V input trigger wire for rear camera input.
When you want to use this wire you must put the option “RearCAM-Det” in “Extwire”.
When you do not want to use this wire please put option “RearCAM-Det” in OFF position.
Navi Connect
Battery– Yellow (1)
+12V output permanent
ACC – Red (2)
+12V ignition power output
GND– black (3)
Ground output
