7
Front Panel Controls
(1) POWER
Press the Power button to turn on the unit.
(2) SENSOR
Receiver for the Remote Control Unit
(3) INPUTS
The two inputs ( A and B) are selectable.Thus you can
connect two sources to the SSP-5 (eg a pre-am-
plifier and a CD player).
(4) MODE
Normal stereo and four modes of SuperStereo
are selectable, either manually or by use of the
remote control. The first position is for normal
stereo and the remaining four positions give in-
creased levels of SuperStereo
(5) OVERFLOW INDICATOR
The red light will blink when the signal level to
either input (A or B) is too high.
(6) SUPER BASS LEVEL
Control for the Super Bass level. This functions
as super low frequency re-inforcement. eg when
the control (7) is set at 42Hz, a signal of 42Hz will
be generated. The SUPER BASS is provided for
professional use with PA or SR. We do not rec-
ommend its use for home audio and the control
should be normally set at the minimum level.
(7) SUPER BASS FREQUENCY
Control for the Super Bass Frequency. The frequency
can be adjusted according to the music source.
(8) FRONT/REAR BALANCE
Turning the control to the left reduces the sound level to
the rear speakers. When turned to the right, the sound
level to the front is reduced.
(9) FRONT MAIN/CENTER LEVEL
Control for adjusting the sound volume of the center
speakers. When turned to the right the sound level of
the center speakers is increased.
(10) MASTER VOLUME
Adjusts the overall sound level once the sound balance
has been set using (8) and (9).
Remote Control Unit
(1) MUTE key
The LED of the MASTER VOLUME will
blink and no sound will come from the
speakers. To restore the sound, press the
MUTE key again.
(2) INPUT key
To select between input sources, press the
INPUT key A or B.
(3) MODE key
Press the MODE key to select normal ste-
reo or one of the 4 SuperStero modes.
(4) MASTER VOLUME key
To change the sound level, press and hold
the UP or DOWN key until the desired vol-
ume is reached. The LED of the MASTER
VOLUME will light up when the MASTER
VOLUME control is being used.
Reception Limits for Remote Control Unit
30 degrees up or down or to the right or left of the
central position with a maximum working distance of
about 7metres.
