manualshive.com logo in svg

Dynaudio Focus XD, Owner'S Manual

Share
Download
Dynaudio Focus XD Owner'S Manual Download Page 27

dynaudio.com/focusxd

P27

dynaudio.com/contour

Care & Maintenance / Warrenty

Warranty

The warranty is based on the statutory regulations  
of the respective country. Furthermore, Dynaudio  
offers an extended warranty after registration online at  
http://www.dynaudio.com/register. Please refer to the 
information during registration for warranty periods.

This warranty only covers faults or defects in material and production. Damage caused  
as a result of abuse, misuse or defective electronics is not covered by the warranty. All 
warranty claims must be accompanied by a copy of the original purchase invoice and 
warranties are only valid in the country or market of original origin or distribution. Should 
warranty service be required, it must be arranged for in the country of purchase by an 
authorized Dynaudio dealer.

Malfunctions

You can ask your Dynaudio distributor for assistance at any time or contact the  
Dynaudio helpline at [email protected].

Further information can also be found on the Focus XD website at focusxd.dynaudio.com.

Summary of Contents for Focus XD





























Reviews:

No comments

Brands by name

Popular brands

Load more brands