Owner’s Manual Focus XD
7
6
dynaudio.com/focusxd
Unpacking / Setting up
1.
2 Focus XD loudspeakers (60 XD, 30 XD, or 20 XD)
2 Focus XD loudspeaker cloth covers (not shown)
2.
1 remote control
3.
2 power cables (country-specific version)
1 first time setup manual (quick guide for installation, not shown).
Unpacking
Scope of
delivery
Disposal
After unpacking, make sure the system is complete and check the device and all
accessories for transport damage. Transport damage may be expected if the packaging is
already severely harmed. Do not attempt to commission a damaged device. If the contents
are incomplete or damaged, please contact your Dynaudio distributor.
Distributor addresses can be found in the Internet at www.dynaudio.com.
Packaging material
The packaging has been designed so that it may be reused if it was not damaged during
transport. Keep the packaging and use the original packaging for all further transport.
Disposal of used electrical and electronic equipment (applicable in European countries with
separate collection systems for this equipment).
This symbol on the product or its packaging indicates that the product may not be treated
as household waste. Instead it must be handed over to the applicable collection point for
the recycling of electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for the environment and
human health. The recycling of materials helps to conserve natural resources.
For more detailed information on recycling this product, please contact your local authority,
community waste disposal office, or the shop where you purchased the product.
3
2
1
Spikes with sharp peaks
The floor-standing Focus XD loudspeakers allow for setup with spikes. The sharp peaks of
the spikes may cause injuries and damage sensitive surfaces like hardwood flooring or tile.
►
Be careful when handling the loudspeakers.
►
Place plates between the spikes and the surface to protect the underlying surface.
ATTENTION
Light, heat, electromagnetic radiation
Direct sunlight or excessive brightness can affect the colour of your loudspeakers’ natural
wood veneer. Built-up heat can lead to overheating. Electromagnetic radiation of different
devices can lead to mutual impairment to functions.
►
Avoid placing the device in very warm, cold, or humid environments.
►
To maintain the aesthetic quality of your loudspeakers for the long term, placement in
light-intensive, sunny environments should be avoided.
►
Please ensure sufficient ventilation and observe the required distances around the
loudspeakers.
►
Do not place the loudspeakers near devices with strong electromagnetic radiation or
devices that could be destroyed or damaged by magnetic fields.
Summary of Contents for Focus 20 XD
Page 1: ...Owner s manual Focus XD ...
