You can use the
DATA UP
and
DOWN
buttons instead of the
REVERB DEPTH UP
and
DOWN
buttons.
If you press both
UP
and
DOWN
Buttons at the same time automatically return to the default reverb
depth of each part. (
default
Main Voice 70, Layer Voice 70, Split Voice 70, Chord parts 70, Bass 20, Drum 40)
The range of volume is 0 ~ 100.
Hold the button for continuous decrementing or incrementing.
If the
DISPLAY HOLD
is on, the pop-up display does not return to main menu and the LCD screen
shows the current pop-up display.
The
DATA
buttons or
DATA
wheel can adjust the volume instead of the
VOLUME UP
and
DOWN
buttons in the pop-up display.
The reverb depth pop-up display can be called up from the reverb pop-up display.
When the LCD screen shows the reverb pop-up display, press the
YES
button. The reverb depth pop-up
appears.
31
Reverb
ADJUSTING THE TOTAL DEPTH
This determines the total depth of the reverb.
Call up the SETUP mode.
Press and hold down the
SETUP
button. The setup pop-up appears in the LCD screen.
Adjust the total depth.
Adjust the total depth by using the
REVERB DEPTH UP
and
DOWN
buttons .
Return to the play mode.
Release the
SETUP
button.
If you press both
UP
and
DOWN
buttons at the same time automatically return to the default
reverb total depth (50).
The range of volume is 0 ~ 100.
Hold the button for continuous decrementing or incrementing.
If the
DISPLAY HOLD
is on, the pop-up display does not return to main menu and the LCD screen
shows the current pop-up display.
The
DATA
buttons or
DATA
wheel can adjust the volume instead of the
VOLUME UP
and
DOWN
buttons in the pop-up display.
ADJUSTING THE DEPTH FOR EACH PART
The reverb part depth parameter lets you make different reverb depth setting for
the rhythm, bass and chord parts of the auto-accompaniment, as well as the
parts you play from keyboard.
Call up the SETUP mode.
Press and hold down the
SETUP
button. The setup pop-up appears in the LCD
screen.
Adjust the depth of the selected part.
Adjust the depth of the selected part by using the
REVERB DEPTH UP
and
DOWN
buttons .
Move the cursor to the desired part.
Press the
YES
button until the cursor is located on the desired part.
Call up the reverb depth pop-up display.
Press the
REVERB DEPTH UP
or
DOWN
button. The reverb depth pop-up appears.
Return to play mode.
Release the
SETUP
button.
