DFE-22-011
Toll Free: 1-800-928-3962
2002-2009 Yamaha Road Star Warrior - 3
1
Remove the seat. Remove the two nuts at the rear of the fuel tank.
2
Remove the left hand cosmetic cover (chrome triangle cover that looks
like an airbox).
3
To remove the fuel tank release the two drybreaks shown in Fig. A1
and A2.
NOTE:
Do not cut the metal bands around the fuel lines to remove.
4
Remove the fuel tank.
5
Remove the airbox.
To remove, unscrew the two bolts shown in Figure B. Also loosen the clamp screw
at the intake snorkel. To access this screw go in from the top of the bike on the
inside of the frame.
6
Route the wires from the Fusion from the under the frame bracket
towards the airbox (Fig. C)
Route the wiring harness along the upper right side frame rail using
the stock wire wraps to tie the harness.
The individual wires with spade connectors will go all the way to the
front of the frame where the Ignition Coils are located.
Remove
Ground wire
Remove
Release
Release
Remove
Fusion harness
FIG
.A
FIG
.B
FIG
.C