INSTRUCTIONS : PR-2500-UD Cod : DYN 05.01.08
Date: 15/04/2016 Revision: 08
5
To secure the safety gear onto the frame, we recommend a 79.09 Nm tightening torque for grade 8.8 M12
bolts, and of 111 Nm for grade 10.9 bolts.
⚠
Safety gear position:
a) The safety gears should be assembled in the position displayed in Figure 4
b)
The roller for upwards jamming is indicated with letter “A”. That is to say, roller “A” should be on the
upper part of the safety gear.
c) The roller for downwards jamming is indicated with lett
er “D”. That is to say, roller “D” should be on
the lower part of the safety gear.
Figure 4: Direction of assembly
Figure 2: Assembling safety gear onto the frame (1)
Figure 3: Assembling safety gear onto the frame (2)
