INSTRUCTIONS: REPLACEMENT/SAFETY GEAR; Code: DYN 32.03.00
Date: 29/06/2016 Revision: 00
10
-
Stickers with the new guide rail thickness.
2. Removing the sticker from the safety gear
Figure8 Safety gear PR-2000 UD V50
3. Unscrew the DIN 912 M6 screws from the shoe according to Figure9Figure7.
4. Replace the shoe for one of the appropriate thickness.
5. Replace the screws.
6. Use the appropriate screw size thickness according to the assembled shoe thickness:
Shoe thickness
Screw type
5
M6x25 DIN 912 8.8
6-7
M6x22 DIN 912 8.8
8-9
M6x20 DIN 912 8.8
10-11-12-13
M6x16 DIN 912 8.8
14-15
M6x14 DIN 912 8.8
16
M6x12 DIN 912 8.8
⚠
For these safety gear models, adapting the shoe thickness to the guide rail centre is done via
the block. If the shoe replacement is not the same type, they will not fit together. The hole
measurements to the guide rail centres that appear in the usage and maintenance instructions
