manualshive.com logo in svg

Dynasty T6V693, User Manual, Page: 3 / 77

Share
Download
Dynasty T6V693 User Manual Download Page 3

Warning and disclaimer

This manual  is designed to provide information  about  the
PentiumÆ II system  board.  Every effort has been made to make this
manual as accurate as possible, but no warranty or fitness is implied.
All the information is provided on an 'as is' basis. The author and his
corresponding publishing company shall  have neither liability nor
responsibility to  any  person  or entity with  respect to any loss or
damages arising  from the information  contained in this manual  or
from the use of the system board that accompanies it.

Information contained in this manual is subject to change without
notice. The manufacturer of the main board will not be held
responsible for technical or editorial  omissions made herein, nor for
the incidental or consequential damages resulting from its furnishing,
performance, functionality or use.  Subsequent changes to this
manual will be incorporated into the next edition. We welcome any
suggestion regarding this manual or our computer products.

Trademarks

•

 

Intel and Pentium are registered trademarks of Intel Corporation.

•

 

IBM is a registered trademark of International Business Machines

Corporation.

•

 

Microsoft is a registered trademark of Microsoft Corporation.

•

 

PCI is a registered trademark of PCI Special Interest Groups.

•

 

AWARD is a registered trademark of Award Software Inc.

All other trademarks are the property of their respective owners.

Summary of Contents for T6V693














































































Reviews:

No comments