Dynasty ProAudio WSA-5RP Manual Download Page 5

1. Connect the right speaker to the right speaker terminals of the WSA-5RP wireless 

receiver, and the left speaker to the left speaker terminals.

2. If the speaker wires are attached to the speakers already, connect the positive (+) 

wire from the right speaker to the red (+) terminal for the right speaker on the 
WSA-5RP wireless receiver and the negative (-) wire from the right speaker to the 
black (-) terminal for the right speaker on the WSA-5RP wireless receiver

3. Connect the left speaker the same way 
*Make sure the exposed tips of the speaker wires don’t touch each other, and make sure 

they are fully inserted into the terminals 

5. Connect the DC power input of the WSA-5RP wireless receiver with the supplied 

large 24V AC adapter, then plug it into a standard household outlet 

(

ATTENTION: 

Connect the amplifier receiver to the AC adapter 

BEFORE

 connecting the AC adapter 

to the power outlet to avoid sparks due to rush-in current) 

Install the WSA-5RP Wireless Receiver

DC 24V

-5-

4.

 

(Option)

 

Place

 

the

 

active/powered

 

subwoofer

 

speaker

 

at

 

its

 

intended

 

location

 

(refer

 

to

 

your

 

subwoofer

 

owner’s

 

manual),

 

and

 

using

 

the

 

mono

 

RCA

 

cable

 

to

 

connect

 

the

 

WSA-5RP

 

wireless

 

receiver’s

 

subwoofer

 

output

 

to

 

your

 

subwoofer

 

audio

 

input.

Summary of Contents for WSA-5RP













Reviews: