1
E-mail: info @dynaset.com
DYNASET OY, Menotie 3,
FIN-33470 Ylöjärvi, FINLAND
Tel.: +358 3 3488200
Fax: +358 3 3488222
MAY CHANGE WITHOUT PRIOR NOTICE
3/26
MAY CHANGE WITHOUT PRIOR NOTICE
STREET WASHING EQUIPMENT KPL 270 - 200 - 1250x8
Operating with DYNASET high pressure equipment user has to conform to all safety regulations concerning
pressurized equipment. Hydraulic circuit has a high pressure 210 bar.
EQUIPMENT TECHNICAL CONDITION HAS TO PAY SPECIAL ATTENTION.
In order to avoid accidents all operators and maintenance personnel must act in compliance with the laws,
regulations and recommendations the high pressure hydraulics, electricity and work safety issued by local
authorities.
EXTERME CLEANLINESS MUST BE MAINTAINED WHEN CARRYING OUT ANY SERVICE DISSASSEMBLING OR REPAIR OF
HPW-UNIT AND HYDRAULIC SYSTEM. THIS IS CRUCIAL TO ENSURE SAFE, RELIABLE AND LONG-LIFE OPERATION
OF YOUR EQUIPMENT.
Hydraulic system has to maintain regularly. Especially couplings, valves and hoses have to be tight. Check
and fix possible leakages of pressure and hot blowouts immediately avoiding user and bystander injuries.
The pressure in hydraulic fluid circuit is considerably high what for the technical condition of your equipment
should be under constant scrutiny. Especially couplings, valves and hoses should be maintained tight and
clean as well as kept under constant observation.
In order to exclude possible accidents, it is not allowed to clean or inspect HPW unit when hydraulic fluid
circuit is pressurized. Prior to any cleaning, inspection and service hydraulic system of your carrier machine
must be stopped and all hydraulic fluid circuits discharge.
When maintaining and driving the HPW pump in a pump cabinet, wear appropriate clothing and safety
equipment such as goggles, ear and eye protection, safety shoes. Beware of machinery parts are warm by hot
hydraulic oil.
Operators and maintenance personnel must always comply with local safety regulations and precautions in
order to close out the possibility of damages and accidents.
All installation and service of both hydraulic and electric equipment must be performing experienced
personnel only.
Preventing freezing nozzles and water circuit, pipeline draining and air flushing have to perform
before -0°C temperature.
SAFETY PRECATIONS
WARNING STICKER
Dynaset dispatch department includes one (1) warning sticker bag per one (1) main product.
Product recipient is obligated to fix determinate warning sticker to Dynaset product.
Fix sticker to visible and appropriate place or close to Dynaset product where it’s easily seen.
Before fixing sticker clean surface with solvent detergent.
READ OPERATOS INSTRUCTIONS. BEWARE OF HIGH PRESSURE KEEP FROM FREEZING. USE EAR PROTECTOR AND
SPLATTERS.
GLOGGLES.
May 2012