background image

2

3

INTRODUCTION

Thank you for purchasing the DynaRest

AirFloat 100 Air Mattress with Pump. This 

user’s manual provides instructions on how to 

correctly use the product and gives valuable 

advice regarding your safety. Please read 

through the manual carefully before using the 

product. Should you have any questions, 

please contact your dealer for advice and 

assistance.

INTENDED USE

The DynaRest

 AirFloat 100 Air Mattress is 

designed for bed sore and wound care therapy 

treatment and prevention, which may occur 

during an extended hospital stay and nursing 

home / long term care environment.

WARNINGS

Keep this manual in a safe place and refer to 

the manual before use and under proper 

medical supervision. Improper operation of 

this system may cause damage to the product 

and possible injury to the user.
•  Do not use this product or any available 

optional equipment without first completely 

reading and understanding this instruction 

manual. If you are unable to understand the 

warnings, cautions or instructions, please 

contact a healthcare professional, dealer or 

authorized technician before attempting to 

use this equipment, otherwise injury or 

damage may occur.

•  Only qualified personnel trained in the 

treatment and prevention of bedsores 

should operate this device.

•  Attention has to be paid to a potential 

danger that requires correct procedures or 

practices in order to prevent personal injury.

•  Close supervision is necessary when this 

product is used by, on, or near children or 

persons with a disability.

•  Keep the unit and cord away from heat 

sources and liquids.

•  Never block the air openings of the product 

or place it on a soft surface, such as a bed 

or couch, where the air openings may be 

blocked. Keep the air openings free of lint, 

hair and the like.

•  Do not use outdoors or operate where 

aerosol (spray) products are being used.

•  Never drop or insert any object into any 

opening or hose.

•  Do not remove the housing of the Control 

Unit to avoid electrical shock. All 

disassembly or repair should be done by 

professional technicians.

•  Never operate this product if it has a 

damaged cord or plug, if it is not working 

properly, if it has been dropped or damaged, 

or dropped into water. Return the product to 

a service center for examination or repair.

•  Connect this product to a properly grounded 

outlet only.

•  Make sure the pump unit is suitable for the 

local power voltage.

•  Avoid damaging the plug or cables when 

moving the patient or bed.

•  Ensure that the cables are safe and tidy and 

not caught in the bed mechanism or resting 

on the floor.

•  Do not allow children to play with or operate 

the pump or mattress.

•  Do not use this product for any purpose 

other then what is indicated in this manual.

•  Dynarex declines all liability for any 

consequences resulting from incorrect use 

of this product and from any unauthorized 

alterations of this product.

•  The manufacturer reserves the right to 

change the information contained in this 

document without prior notice.

CONTROLS AND FEATURES

1.  Power Switch

  Turn ON/OFF the power, the 

pump will start/stop operation. 

ON

OFF

5.  Mode Toggle Switch

Turn the switch to 

"Alternating" to turn on the 

alternating pressure function. 

Turn the switch to "Static" to 

turn on the static mode.

NOTE: 

In static mode, the 

mattress provides a firm 

surface that makes it easier 

for the patient to transfer or 

reposition. The static mode 

helps prevent the patient from 

bottoming out when in a 

sitting position.

NOTE: 

After toggling the 

Mode Switch it might take up 

to 6 minutes for the new 

mode to start

Static

Alternating

3.  Normal Pressure Indicator

  A visible indicator (green) 

shows the pressure has 

reached a preset level. 

4.  Low Pressure Indicator

A visible indicator (amber) 

warns the pressure is below 

a preset level.

2.  Pressure Adjust Knob

(adjustable by patient’s 

weight) 

  Turn the Pressure Adjust to 

set a comfortable pressure 

level by using the weight scale 

as a guide.

SOFT

FIRM

NORMAL PRESSURE

LOW PRESSURE

SOFT

NORMAL PRESSURE

LOW PRESSURE

ON

OFF

POWER

STATIC

FIRM

lb.

DynaRest

Airfloat 100

80

120

150

180

210

250

280

320

350

3

4

1

2

5

Reviews: