2
Universal Q Assist Bar (Reorder No. 12960)
Universal Q Assist Bar (Reorder No. 12960)
3
• Read the instructions carefully before installing.
• Before operating, ensure that the bed rails are assembled
and installed correctly as instructed. Ensure that all the
attaching hardware are tightened and that the bed rails
are securely in place. Inspect the hardware frequently to
make sure all the components are tightened securely.
•
DO NOT
use the bed rails as a handle for getting into or
out of the bed. This could result in personal injury and
damage to the bed rails.
•
DO NOT
apply side pressure to the bed rails. This could
deform or even break the bed rails.
•
DO NOT
use the bed rails as a push handle for moving
the bed. This could deform or even break the bed rails.
•
DO NOT
use the bed rails if proper installation cannot be
achieved. Contact your dealer or manufacturer.
RAIL OPERATION
PARALLEL RAIL ALIGNMENT:
Lift up and rotate the bed
rail until it is parallel to the bed edge and release the bed rail.
Ensure it is securely locked in place.
PERPENDICULAR RAIL ALIGNMENT:
Lift up and rotate
the bed rail until it is perpendicular to the bed edge, then
release the bed rail. Ensure it is securely locked in place.
MOUNTING INSTRUCTIONS
1. Before installing the rails, the bed should be in the flat
position. The carton should include 2 bed rails as shown:
2. Clamp the rail bracket over the edge of the bed deck with
the vertical sliding steel plate positioned on the inside of
the bed frame. Tighten the two Allen screws and rotate
the turn knob underneath the bracket clockwise until the
rail is secured in place. Repeat the procedure to install the
bed rail on the other side.
The rails can be positioned at the head or foot section.
WARNINGS
