HEIGHT
ADJUSTMENTS
• Stand with your arms hanging loosely at your sides.
• The walker hand grips should be at the height of your
wrists.
• The walker should be adjusted with push buttons and
holes on all four legs.
• Push the button with your thumb and adjust to the
correct hole height.
• Repeat this adjustment for all four walker legs making
sure that the walker is level.
• Make sure that each push button is locked in place
after the height is adjusted.
Caution:
Be aware of the following:
- Electrical cords in way
- Liquids on floor
- Throw rugs
- Toys or debris
- Furniture
- Doors and door steps
- Gaps in floor
Warning:
1. Wear shoes or slippers with rubber or other non-skid
soles. DO NOT wear shoes with heels or leather
soles.
2. Use Dynarex accessories only. Use of other
manufacturers’ accessories can result in
improper fit and risk fall and/or injury.
3. Do not use on stairs or escalators.
4. Check the tips and wheels of your walker daily and
replace them if they are worn.
5. Keep space between you and your walker, and
keep your toes inside your walker. Stepping too
close to the front or tips or wheels may make
you lose your balance.
Three-Point Gait
(For Walking With Walker)
Step 1
Align the middle of your
foot with the back legs
of the walker.
Step 2
Lift the walker up and
place it comfortably in
front of you, making sure
all four legs end up on
the floor.
Step 3
Carefully, walk forward
one step at a time.