Dynapac F1800W, Operation & Maintenance Manual

Page: 59 / 348

C 12.18 1
C 12.18Transportation
1 Safety regulations for transportation
m Accidents can happen when the paver finisher and the screed are not properly pre-
pared for transportation or when transportation is carried out improperly!
Reduce both the paver finisher and the screed to their basic widths. Remove all pro-
truding parts (such as the automatic levelling system, auger limit switches,
aprons, etc.). When transporting under a special permit, secure these parts!
Close the hopper lids and set the hopper transport safeguards. Lift the screed and
engage the screed transport safeguards. Convert the protective roof and engage
the latch.
Pack all parts that are not permanently fixed to the paver finisher and the screed into
the appropriate boxes and into the hopper.
Close all coverings and check that they are securely seated.
In Germany, gas bottles must not be transported on the paver finisher or on
the screed.
Disconnect the gas bottles from the gas system and protect them with their caps. Use
a separate vehicle to transport them.
When loading via ramps, there is a risk that the machine will slip, tilt or overturn.
Drive carefully! Keep people away from the danger area!
Additional stipulations for transportation on public roads:
m Comply with the local road traffic regulations!
m On the screed, remove the floorboards and place them in the hopper.
Hinged side shields must be swivelled behind the screed and secured correctly.
The operator must be in the possession of a valid permit for vehicles of this type.
The driver's seat must be positioned on the side facing on-coming traffic.
The driving lights must be properly adjusted.
Only accessories and extension parts may be transported in the hopper, no material
or gas bottles!
If necessary, the operator must be assisted by a second person when driving on pub-
lic roads – especially at road crossings and junctions.