Dynapac DFP12D, Operating Instruction

Page: 83 / 98

4. Pull the fuel filter out of the tank by the string.
5. Pull the fuel hose (3) off the fuel filter (2).
6. Take the fuel filter out of the bracket (1) and replace it with a
new one.
7. Plug on the fuel line.
8. Insert the fuel filter into the tank.
9. Close the fuel tank tightly.
The fuel system is self-bleeding.
10. Dispose of fuel and filter in an environmentally friendly way.
8.7.6 Replacing the starter rope
Protective equipment: n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.5
„Parking the machine in secured condition“ on page 58 .
2. Allow the engine to cool down.
3. Unscrew the fastening screws (1) and disassemble the recoil
starter (2).
4. Pull the starter rope with the starter handle (1) out com-
pletely.
5. Secure the coil (2) against winding up.
6. Loosen the knot (3) in the starter rope and remove the old
starter rope.
7. Carefully turn the coil back, until the recoil spring is relieved.
Fig. 77
Fig. 78
Fig. 79
Maintenance – Annually
DFP12D 83