G.shdsl Router User Manual 152
26
Bridge Mode
PC
IP: 192.168.0.2
Netmask: 255.255.255.0
Gateway: 192.168.0.254
VPI:0, VCI:32
Encapsulation: LLC
DSLAM
ISP
Bridge
BAS
IP: 192.168.0.1
Netmask: 255.255.255.0
Gateway: 192.168.0.254
IP: 192.168.0.254
Before configuration the router in bridge mode
check with your ISP about these information.
Click Bridge and CPE Side to setup Bridging
mode of the Router and then click Next for
the next setting.
This product can be setup two SHDSL mode:
CO, Central Office, and CPE, Customer
Premises Equipment. For connection with
DSLAM, the SHDSL mode is CPE. For LAN
to LAN connection, one side must be Co and
the other side must be CPE.
LAN Parameters
Enter IP: 192.168.0.1
Enter Subnet Mask: 255.255.255.0
Enter Gateway: 192.168.0.254
The Gateway IP is provided by ISP.
Enter Host Name: SOHO
Some of the ISP requires the host name as
identification. You may check with ISP to
see if your Internet service has been
configured with a host name. In most cases,
this field can be ignored.
WAN1 Parameters
Enter VPI: 0
Enter VCI: 32
Click LLC
Click Next.
VPI:
VCI:
Encapsulation:
Gateway:
Host Name: (if applicable)
