Dynamix DW-01Plus/H Gateway User Manual
- 51 -
-
Forward time
: It supports the No Answer Forward function. If users configure it
for 10, the call will be forwarded when it rings about 10 seconds. From 5 to
65535.
-
Keypad Type
: User could define the keypad for the DTMF sending.
1.
In-Band : The DTMF signal sending by RTP.
2.
Out-Band : The DTMF signal sending not by RTP. Including
the H.245(Alpha), H.245(Signal), Q.931 and RFC 2833.
-
User Defined Prefix Switch
: Select on/off for User defined local zone prefix
switch. If user enables prefix function, once user dials out, gateway will
automatically add prefix number before number user dialed.
-
User Defined prefix Disable
: Disable the defined prefix after press the
selected digit (0,1~9, *).
-
User Define prefix
: This will be added in the first digits of the numbers that
users had dialed. Can also define IP address here in P2P mode, once user
press
“
#
”
, Gateway will call out this IP address.
-
Codec Select Method
: This could support that the codec will follow the MSD
(MasterSlaveDetermination) or the caller side.
1.
Master:
Follow
the
result
from
the
MasterSlaveDetermination.
2.
Caller: Follow the caller side.
-
Reverse (FXS)
: Enable or disable the Reverse signal generation function.
-
Local Generate Ring Back Tone (FXS)
: To enable or disable the ring back
tone generation from the local side.
-
Round Trip
: The call will be disconnected automatically, if the network is
failed, default value is 10 seconds.
-
Gateway Prefix
: To keep or drop the prefix number of this gateway. This
only support the Gateway type in the GK routed mode. Please get more detail
useful as below:
-
End of Dial:
To enable or disable the end of dial function. This function key
will be the digit
“
#
”
.
-
Dial to PSTN side (162)
: This function can let user dial out by PSTN. User
just need to press
“
*#
”
, the call signal will relay from IP side to PSTN side.
-
Detect silence voice (FXO)
: This function could detect the silence from the
PSTN side. If the FXO detect the silence for 40 seconds continuous, it will drop
the calls.
Only support FXO
.
-
Ring Time (FXO)
: It for the ring detection from the PSTN. The ring detection
will be failed if users configure it too long.
Only support FXO
.
-
Ring Before Answer (FXO)
: This will help the users to answer the calls from
PSTN into this gateway quickly. The call will be connected by one time ring if
