5.Re-connect with all the connected device:
Power on the unit ( two connections simultaneously ), short press MFB to connect back with
all the paired devices automatically (support two devices connection simultaneously,
prioritize the latest two ones). Solid blue LED to successful connected. Enter into pairing
mode if without connected with any devices more than 22 seconds.
6. Power off automatically
Power off automatically when the battery voltages lower than 3.1V.
7. LED indicator
Power on
Blue LED flashes twice
Pairing
Blue LED flashes
Unconnected standby mode
Blue LED flashes once every second
Connected standby mode
Solid Blue LED
Low voltage
Red LED flashes
Charging
Solid Red
Fully charged
Red LED turn off
Tips: In off or working state, switch between AUX and SPDIF through the toggle switch.
8. Working while charging:
Support working while charging to continue work. (with DC 5V ≥300mA,)
Steps: 1.Connect the unit with power supply.
2.Power on item BTI-029 to enter into pairing mode.
3.Connect with devices and work.
Tips: 1. May have noise when the battery voltage too low or with poor power supply.
2. Connect the power supply to repower the item when the unit dead.
3. Advise not to use while charging often, as it will shorten the life of battery.
➢
Working as a Bluetooth Receiver
Select working mode through the Slide option button. Slide the button to “ RX” side (off state).
Tips: 1. All the paired devices in TX mode will be deleted after power on
2. Change the different mode (TX or RX) should be done more than 3 seconds later
after the unit power off.
3. Could stored 8 paired devices , and auto update to the latest paired lists.
