Introduction
Thank you for choosing the Prophet Select DC Peak Detection Charger. Charging 4–8 cell Ni-Cd and Ni-MH
battery packs safely and efficiently has never been so easy. Just select a charge rate of 1, 2 or 4 amps and press
the start button. The charger will automatically stop fast charging when it senses that the pack is fully charged and
enters a safe trickle charge mode to equalize cell voltage and maintain full charge.
Although this product is designed for ease of use it is not a toy and requires some basic mechanical ability and
adult supervision. This Manual contains basic instructions for safety, operation and maintenance. It’s essential to
read and follow all the instructions and warnings in this manual, prior to assembly, setup or use, in order to operate
correctly and avoid damage or injury.
1. 12V DC power cord with alligator clips
2. Charge rates of 1, 2, or 4 amps
3. LED and beeper indicate when charge is complete
4. Tamiya-style connector
Additional Features
• Receiver pack charge lead adapter included
• Charges 4- to 8-cell Ni-Cd or Ni-MH battery packs
• Limited 5-year warranty
• Advanced trickle charge
• Advanced peak detection circuitry
• Ni-Cd and Ni-MH compatible
Supplying power to the charger
This charger can be powered by using the provided alligator clips to connect the charger to a 12V DC power
source, such as a 12V hobby battery (HAN102), a 12 volt power supply or an automobile battery.
Connect the red (positive) end of the alligator clips to the red terminal of the DC power source and the black
(negative) end of the alligator clips to the black terminal of the DC power source. If you choose to power the
charger with an automobile battery, never do so with the automobile running!
Features
2
3
1
4
