GBK65701 DX2 Compact Remote Modules
Installation Manual Issue 1
6.4 Programming
Before using the compact remote modules, update the system's
User Profile Options
and
System
Settings
, as detailed below.
6.4.1 User profile options
In the User Profile Options sec-
tion, set the
Joystick Source
option to the type of remote
module for one of the available
profiles.
Figure 15: Joystick Source example
For example, in
, Joystick Source has been set to RJM in Profile 4.
Note
:
Dynamic Controls recommends that you do not select
ACU
for the Joystick Source parameter for profiles 1 - 5.
The ACU profile is automatically selected by the master remote module when the ACU takes control of a system. If
another profile, other than the ACU profile, is selected and the profile has been configured with the ACU as the
joystick source, then the Attendant indicator will not operate—the Attendant indicator only operates with the ACU
profile.
See also
:
6.4.2 System settings
Set
RJM Enable
to
Yes
if a DX2-RJM or DX2-RJM-LF is part
of the system.
Figure 16: Set RJM Enable
Set
ACU Enable
to
Yes
if a DX2-ACU is part of the system.
Figure 17: Set ACU Enable
See also
:
Page 20 - Installation