GBK65701 DX2 Compact Remote Modules
Installation Manual Issue 1
Note
:
The mounts shown in the following sections are suggestions only; Dynamic Controls does not manufacture or
supply the mounts. The OEM is responsible for the final design of the mount and its application.
6.1.2 Tray mount
The remote module can be mounted on to any suitable flat
surface, such as a tray, using the fixing holes underneath the
module and two M5 bolts. The maximum torque to fasten these
bolts is 3 Nm – do not exceed this rating as it may damage the
remote module.
This solution is ideal for wheelchair occupants that require the
remote module to be in a more central position, rather than the
standard placements of the left- or right-hand armrests.
Figure 6: Fixing centres
6.1.3 Clamp mount
The compact remote has a cylindrical base which is suitable for attaching a cylindrical style clamp or
clip.
Figure 7: Clamp diameter
Figure 8: Clamp mount
Figure 9: Fixing the clamp mount
6.1.4 Plate mount
The remote module can be mounted using a flat base plate (see
) and
two M5 bolts. The maximum torque to fasten these bolts is 3 Nm – do not exceed this rating as it may
damage the remote module.
Figure 10: Base plate example
Figure 11: Fixing the base plate
Page 16 - Installation