1.2
The DX-GB Gearless Brushless controller
The Dynamic DX Gearless Brushless Power Module (DX-GB) is a DX BUS compatible
module that converts signals generated by a DX Remote into high current outputs.
These outputs drive the motors that control the powerchair speed and direction. The
combination of a DX-GB and DX Master Remote give an exceptionally smooth,
powerful, and safe drive system.
The DX-GB has been designed specifically for use with Gearless Brushless motors, an
alternative to conventional brushed motors commonly in use today. Supplying up to
100-Amps per phase, the DX-GB is perfect for the control of a wide range of
powerchair configurations, including front, mid, and rear wheel drive.
Warning:
DX-GB is ONLY compatible with DX Systems containing recent Master
Remotes like the DX-REMG90(x,) the DX-REMG91 or later. Contact
Dynamic to check compatibility with other variants or custom
remotes.
The DX-GB is fully programmable to cater for the wide range of powerchair types and
user needs. Correct installation and programming are essential to ensure optimum
performance and safety.
A DX wheelchair control system comprises of two or more compatible
modules. Each module has its own installation manual.
This manual describes the DX-GB only and therefore must be read in
conjunction with the other DX Modules to be used in your application.
GBK64048
: Issue 1 – June 2007
8
